5 Sprinkler Maintenance Tips for Salt Lake Homeowners
A dry patch does not always mean the whole lawn needs more water. Before changing the timer, take a walk through the yard and see what each zone is doing. These five checks give Salt Lake homeowners a practical place to start.
1. Watch each zone run
Look for cracked heads, wet spots, blocked spray, and water landing on the sidewalk. Note which zone has the problem. EPA WaterSense recommends monthly irrigation inspections during use.
2. Check the controller settings
Confirm the clock, watering days, start times, and runtime for each zone. Use the manual for your model rather than guessing what a setting does. USU’s maintenance guide explains the seasonal controller checks.
3. Adjust for weather and your water provider
Keep your provider’s current restrictions handy. Revisit the schedule as weather changes; spring and fall generally need less irrigation than summer. Our local water and soil guide helps you find the right provider.
4. Watch for runoff
If water runs off before soaking in, shorter watering cycles separated by soak time may help. The right timing depends on your soil, slope, and sprinkler output. Don’t apply one fixed number of minutes to every zone.
5. Fix coverage before adding watering time
Check whether plants block a head or a spray misses the dry area. A leak or damaged component needs attention before you compensate with longer cycles. See our dry-spot troubleshooting guide.
Need another set of eyes?
Call (385) 226-5764 or text the Salt Lake team with your city and what you noticed. Ask about availability, visit scope, and pricing before booking.
Sources and further reading
- USU Extension: irrigation system maintenance
- EPA WaterSense: watering tips
- USU Extension: checking soil moisture
For related service information, visit the main Sprinkler Master website and Sprinkler Master Weber County’s repair guide. These regional pages describe service in their own areas; Salt Lake City appointments are handled by our local team.
